Driveway and patio coatings inPost Falls, Idaho.
Half the concrete in Post Falls is newer than the trucks we drive, and builder-grade broom finish still pits after two winters of deicer. Coat it once and the slab under it stays new. We are minutes away, so scheduling is simple.
New driveways deserve better than bare broom finish.
From Riverbend out to Hauser, subdivisions are pouring fresh concrete every month. The smart move is coating it before freeze-thaw and road deicer get their first season on it.
- 01
Deicer off Seltice
Everything spread on Seltice Way in December rides into your driveway on your tires. Bare concrete absorbs it and spalls by spring. The polyaspartic topcoat is chemically resistant, so salt and deicer sit on the surface and rinse off instead of etching in the way they do on bare concrete.
- 02
Flexes through the freeze
North Idaho slabs move. They expand, contract, and heave a little every winter, and a rigid coating like epoxy cracks right along with it. Our polyurea base coat stays flexible in the cold, so the system rides that movement instead of fracturing. Cracks and joints get polyurea fill before anything else goes down.
- 03
Patios by the river
A patio near the Spokane River gets full sun half the year and frost the other half. UV-stable polyaspartic will not yellow or chalk in the sun, and the broadcast texture keeps footing sure when the surface is wet. Pick from 13 flake blends or 1,700+ silica colors.
Built for outdoors.
Post Falls sits between our Coeur d'Alene shop and the Washington line, which makes it about the easiest place on the map for us to schedule. Exterior installs are weather-window work: we watch temps, book the right day, and the fast-curing polyaspartic locks in before conditions can turn. That speed is the whole reason polyaspartic beats epoxy outdoors, and it is why most residential exteriors are one-day installs.
The process does not change from driveway to patio to front walk. Diamond grind, polyurea crack and joint repair, polyurea base coat, flake or silica broadcast to full refusal, UV-stable polyaspartic topcoat. In-house crews do the work, no subcontractors, and residential floors carry a lifetime warranty. You get a free on-site measure and a fixed written price before we mix a single bucket.
- UV-stable outdoors: full sun will not yellow or chalk it
- Sheds road salt, deicer, and snowmelt instead of absorbing them
- Flake or silica broadcast adds real wet-weather slip resistance
- Drive on it again in about 72 hours
CITIES SERVED
Post Falls · Coeur d'Alene · Rathdrum · Hauser
One crew, one day, most floors.
The same process on every slab we touch, whether it is next door or across town.
- 01
Repair and grind outside
Exterior slabs usually need work first: polyurea in the cracks and joints, spall repair, then a full diamond grind of the surface.
- 02
Base and broadcast for grip
The polyurea base coat goes down and flake or silica is broadcast to refusal, building in the texture that keeps wet concrete walkable.
- 03
UV-stable topcoat
The polyaspartic topcoat is built for full sun and freeze-thaw. Walk on it the same day, drive on it in about 72 hours.
Driveway and patio questions in Post Falls.
How long before I can park on the new coating?
About 72 hours for vehicles. Foot traffic is fine in roughly 8 hours. We schedule exterior work around the temperature window, so cure times on your job get confirmed for the actual forecast, not a brochure number. Plan to stage cars on the street for three days and you are covered.
My driveway is only a few years old. Worth coating?
Newer concrete is actually the best candidate: less repair, cleaner grind, and you stop the deicer damage before it starts. A lot of our Post Falls work is in newer subdivisions on the Prairie for exactly that reason. Coating now costs less than coating after the surface spalls.
What happens when the snowplow hits it?
Snowblowers and shovels do not bother it. A metal plow blade dragged across any coated surface is a different conversation: the coating is highly abrasion-resistant, but we will tell you straight that a poly edge on the blade is the right setup. Most Post Falls driveways are shovel and snowblower jobs anyway.
Does the texture actually help when it rains?
Yes, and it is not an add-on, it is the structure of the finish. Flake or silica gets broadcast into the base coat until the surface will not accept any more, then sealed. The result has grip wet or dry. You can choose more texture for steps and pool decks, less for a smooth garage-style look.
How do I get a price?
Call 208-500-1043 or book online. We come to you, measure the concrete, check its condition, and bring samples so you pick a finish on your own slab in real light. You get a fixed written price on the spot. No surprise charges later, and no pressure while you decide.
Next steps in Post Falls.
NEARBY
Driveway & Patio Coatings in Coeur d'Alene · Driveway & Patio Coatings in Hayden · Driveway & Patio Coatings in Spokane Valley
Pour a floor
that outlasts
the building.
Tell us the slab. We'll send a quote. Usually same day, always with photos and a fixed price. No high-pressure sales nonsense.
Takes about 45 seconds. We'll text or email you within the hour.