★★★★★
“Karl and his A-Team were Awesome ,they did an Excellent Job. These Guys Love what do and there Work Proves it. Would Highly Recommend them to Everyone. Will definitely be using them for Future Projects. Thank You So Much!”
Michael Friesen
Garage floor coatings in Sandpoint, ID
Sandpoint, Ponderay, Priest River and the rest of Bonner County are a regular stop for our Coeur d'Alene location, 45 miles south, and we bring the full one-day garage floor coating install north, along with shops, lake-house patios and basements, with no job minimum.
Rhino Coatings in Sandpoint at a glance
- Served from
- Our Coeur d'Alene location
- Phone
- 208-500-1043
- Hours
- Mon-Fri 8am-6pm, Sat 8am-4pm PT
- System
- Polyurea base coat, polyaspartic top coat
- Install
- One day on most floors
- Warranty
- Lifetime, residential and commercial
Cities served
Sandpoint, Ponderay, Priest River, Hope, Dover, Sagle
Your local office
Rhino Coatings Coeur d'Alene, 208-500-1043, Mon-Fri 8am-6pm, Sat 8am-4pm PT. Google reviews
Idaho registration
Registered Idaho contractor #7661574. Search Idaho DOPL records
What a garage floor coating in Sandpoint includes
Sandpoint garages carry a different load: sleds, boat gear, firewood, five months of winter. We run a crew north out of Coeur d'Alene every week, no job minimum, coating floors from Dover to Hope and up toward Schweitzer.
Between Schweitzer storms and months of snowmelt, a bare slab up here never really gets a break. The coating has to move with the concrete, not against it.
How each layer goes down is on our garage floor coatings page.
Months of snowmelt
Every truck that parks inside brings a berm's worth of snow, sand, and road treatment with it. That melt pools on bare concrete, soaks in, then freezes and pries the surface apart. On a sealed polyaspartic floor it just sits there until you push it back out the door.
Freeze-thaw damage to Sandpoint garage floors
Long winters mean the slab crosses the freezing line over and over. Our polyurea base coat is freeze-thaw flexible, so it rides that movement without cracking, and we fill cracks and joints with polyurea first so old damage doesn't ghost through the new floor.
Cold, empty buildings
Seasonal places around Lake Pend Oreille can sit unheated for months at a stretch. That kills brittle coatings. The polyurea base coat stays flexible in the cold. Cold slabs can lengthen the install day and the cure, so we confirm walk-on and drive-on timing, or move the date, before we start.
Polyaspartic floor coatings in Sandpoint
The system does not change with the zip code, only the repairs do. We diamond-grind, fill cracks and joints with polyurea, roll the polyurea base coat, broadcast flake or silica to full refusal, and seal it with a UV-stable polyaspartic topcoat. Some slabs need more crack work than others, and that is fine: repair is built into how we quote, not an add-on later.
We install polyaspartic, not epoxy. The comparison, every flake blend, silica color and cure time are on our polyaspartic floor coatings page.
Rhino Coatings at a glance
53 reviews republished from Google and Housecall Pro, BBB Accredited with an A rating, veteran-owned
★★★★★
“Had a great experience with Rhino Coating today! We are building a house and wanted to have the garage floor coated before we moved in. We have an 18 x 36 RV garage attached to our standard two car garage. Roughly 1100 ft.². Karl and the crew showed up this morning about 8am and knocked out the 1100 ft.² Before 5 pm. They all were very knowledgeable on the installation of the coating and it was awesome to watch them work. They clearly have worked together on many jobs. I went with the Nightfall color and I’m 100% happy with it. The floor looks amazing and the color goes with just about anything in the garage. I would definitely recommend using this company. We will be using them again when we build our shop.”
kyle cooper
Reviews republished from Google and Housecall Pro. Read more customer reviews.
What we coat in Sandpoint
Concrete floor coatingsConcrete Repair in SandpointDriveway & Patio Coatings in SandpointBasement Floor Coatings in SandpointGarage cabinets in SandpointFloor coating project photos
Nearby service areas
Coeur d'Alene, ID Hayden, ID Post Falls, ID
Floor coating questions in Sandpoint
Do you come all the way up to Sandpoint?
Yes, Sandpoint, Ponderay, Priest River, Dover, Sagle and Hope are all on our regular North Idaho route out of Coeur d'Alene.
Is the coating good for a lake-house or seasonal garage?
Yes. The cured system rides out freeze-thaw in an unheated garage, and the polyaspartic top coat stands up to road salt and deicer. We check the slab at the free estimate before we coat.
How long does the install take?
One day on-site: diamond-grind, base coat, broadcast, topcoat. Walk on it in about 8 hours, park on it in about 72.
Is a one-car garage worth your drive?
Yes. We run no job minimum on the Sandpoint route, so a small cabin garage gets the same treatment as a big shop: diamond grinding, polyurea base coat, broadcast to full refusal, polyaspartic topcoat. Small floors often wrap up early in the day, which keeps scheduling easy.
Can you install when there's snow on the ground?
Often, yes, as long as the slab allows it. Cold slabs can lengthen the install day and the cure, so we confirm walk-on and drive-on timing, or move the date, before we start. On a normal install you walk on it in about 8 hours and drive on it in about 72.
We're only at the lake part of the year. How does scheduling work?
We plan around your time at the property. The measure and the install can fit inside one visit, since the whole job takes a day plus about 72 hours before you drive on it. You can also leave us garage access and come back to a finished floor.
Flake or silica: how do we choose?
Flake gives the classic granite-look garage floor in 13 blends. Silica reads more like natural stone and opens up 1,700+ colors, which suits lake house finishes. We bring samples to your slab so you compare them on your own concrete in your own light, then you decide. No wrong answer.
Can you coat a cabin garage that sits unheated all winter?
Yes. The cured system handles unheated spaces without trouble; freeze-thaw flexibility is the whole point of the polyurea base. We check the slab at the free estimate before we coat.
More answers on our floor coating FAQ.
Get a free floor coating quote
Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Get a free quote
Or call 208-500-1043
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.
- Free measure
- Fixed price
- Lifetime warranty
- Veteran-owned and insured