Garage floor coatings in Post Falls, ID

We install garage floor coatings in Post Falls from our Coeur d'Alene shop, 8 miles away toward the Washington line, so the drive is one of the shortest on our schedule. Every Post Falls job starts with a free measure at your slab, with no trip charge.

Rhino Coatings in Post Falls at a glance

Served from
Our Coeur d'Alene location
Hours
Mon-Fri 8am-6pm, Sat 8am-4pm PT
System
Polyurea base coat, polyaspartic top coat
Install
One day on most floors
Warranty
Lifetime, residential and commercial

Post Falls also sits on the I-90 run our crews take to Spokane and Spokane Valley every working day, so a measure or an install here fits easily into the week. It is the town we drive through most, and it gets the same crews, the same fixed written price and the same lifetime warranty as Coeur d'Alene.

Cities served
Post Falls, Coeur d'Alene, Rathdrum, Hauser

Your local office
Rhino Coatings Coeur d'Alene, 208-500-1043, Mon-Fri 8am-6pm, Sat 8am-4pm PT. Google reviews

Idaho registration
Registered Idaho contractor #7661574. Search Idaho DOPL records

What a garage floor coating in Post Falls includes

Post Falls sits between our Coeur d'Alene shop and the Washington line, which makes it about the easiest place we work. New build on the Prairie or an older place off Seltice Way, we grind it, coat it, and hand it back in a day.

A lot of Post Falls garages are only a few years old. Deicer and freeze-thaw don't care. The pitting starts the first winter you park inside.

How each layer goes down is on our garage floor coatings page.

  • Deicer, every winter

    Seltice Way and every commuter route around it get treated all winter, and the brine comes home with you. It wicks into bare concrete and pops the surface into pits and spalls. A polyaspartic topcoat is a chemical barrier: salt, brine, and slush stay on the surface instead of soaking in.

  • Freeze-thaw cycles

    North Idaho slabs swell and shrink through every freeze-thaw swing along the Spokane River. Coatings that cure rigid crack right along with the concrete. We fill cracks and joints with polyurea, then lay a polyurea base coat that flexes with the slab instead of fighting it.

  • Builder-grade concrete dust

    New construction concrete sheds fine dust forever: it tracks into the house, settles on tools, coats everything you store. Grinding the cap off and locking the slab under base coat, flake, and topcoat ends the dusting for good. One pass with a shop towel and the floor is actually clean.

Polyaspartic floor coatings in Post Falls

Every floor gets the full system: diamond grinding, polyurea crack and joint fill, a polyurea base coat, flake or silica broadcast to full refusal, and a UV-stable polyaspartic topcoat. No shortcuts, no rolled-on paint. The result is more abrasion-resistant than epoxy and stands up to hot-tire pickup, oil and the deicer you track in off Seltice Way all winter.

We install polyaspartic, not epoxy. The comparison, every flake blend, silica color and cure time are on our polyaspartic floor coatings page.

Rhino Coatings at a glance
53 reviews republished from Google and Housecall Pro, BBB Accredited with an A rating, veteran-owned

Rhino Coatings is headquartered in Coeur d'Alene, Idaho, 8 miles east of Post Falls, so Post Falls is local service: the same crews, the same free on-site measure and no trip charge.

“The crew was professional, efficient and worked their tails off. Solid company. From the owner down to the grunts. I highly recommend them.”

Brad Valentine
February 2026

“Now I have the garage I’ve always wanted thanks to Karl and his excellent team. Its awesome!! Being a business owner, it’s nice to find a company that takes pride in doing what said they would do . I highly recommend Karl and the gang .”

Bob Palm
August 2025

Reviews republished from Housecall Pro. Read more customer reviews.

Rhino Coatings credentials you can check

Public records and third-party ratings, each linked to the source that issued it.

  • Best of North Idaho 2026Winner, garage floor coatings, in the Coeur d'Alene Press readers' poll.See the results
  • BBB Accredited, A ratingAccredited by the Better Business Bureau since June 2026.View the BBB profile
  • Washington registered contractorRegistration #RHINOCL741CF, bonded and insured, for our Spokane-area work.Verify with L&I
  • Idaho registered contractorRegistration #7661574 with the Idaho Contractors Board.Search Idaho DOPL records
  • Idaho limited liability companyRhino Coatings LLC, registered with the Idaho Secretary of State since September 2024 (file 5899253).Search the Idaho record
  • NIBCA memberA member of the North Idaho Building Contractors Association.

What we coat in Post Falls

Nearby service areas
Coeur d'Alene, ID Hayden, ID Spokane Valley, WA Liberty Lake, WA Spokane, WA Dalton Gardens, ID Sandpoint, ID

Floor coating questions in Post Falls

How fast can you coat a garage in Post Falls?

Post Falls is minutes from our Coeur d'Alene shop, so the free on-site measure is usually within a few days, and the install date is set when you accept the bid. The coating is a one-day install: walk on it in about 8 hours, drive on it in about 72.

Do you charge a trip fee for Post Falls?

No trip charge. Post Falls is core local service, same as Coeur d'Alene and Hayden.

Will the coating handle hot tires and road salt?

Yes, polyaspartic is UV-stable and chemical-resistant, so hot tires, deicer and freeze-thaw won't lift or yellow it the way they do epoxy.

Our house just got built. How soon can the garage floor be coated?

New concrete needs to cure before it's ground and coated; roughly 30 days is the usual benchmark. We confirm the slab is ready at the free measure. Booking right after closing means the floor is finished before the garage fills up with boxes.

How much of my week does the install eat?

One day for most Post Falls garages. The crew grinds, repairs cracks with polyurea, lays base coat, broadcasts flake to full refusal, and seals it with the polyaspartic topcoat before they leave. Walk on it in about 8 hours; park on it in about 72.

Is polyaspartic worth it on a brand-new slab?

Yes, and new concrete is actually the easiest to do right. Once the slab has fully cured, we grind it, fill the control joints with polyurea, and coat it before stains and salt ever soak in. Coating a new Post Falls garage now means never scrubbing a pitted, oil-stained floor later.

Do you coat older floors too, or just new construction?

Both. Older Post Falls homes near the river can have slabs with decades of wear, and those floors coat just as well after prep. We grind off the damage, fill cracks with polyurea, repair spalling, and build the system on sound concrete. Bad-looking slabs usually come out looking the best.

How do I get a price?

Call 208-500-1043 or book online. A rep drives over from the Coeur d'Alene shop, measures your floor, lays real flake samples on your concrete, and gives you a fixed, written price. That price is the number on the invoice. No pressure, no follow-up circus.

More answers on our floor coating FAQ.

Get a free floor coating quote

Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.

The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.

  • Free measure
  • Fixed price
  • Lifetime warranty
  • Veteran-owned and insured