Rhino Coatings installs floor coatings, repairs concrete and fits garage cabinets in Coeur d'Alene, Spokane and Boise. The floor is a polyurea base coat and a polyaspartic top coat over diamond-ground concrete, installed in one day on most floors with a lifetime warranty. The repair preps the slab, and the made-in-USA cabinets finish the space.
Our polyaspartic system has a more abrasion-resistant, UV-stable top coat than epoxy. Walk on it in about 8 hours and drive on it in about 72. Flake or silica broadcast, applied to any concrete slab: garage, patio, basement, shop, or commercial floor.
Weighing epoxy? See polyaspartic vs epoxy
Cracks, control joints, spalls, and pitting fixed before they spread, as prep for a coating or as a standalone repair. We diamond-grind and polyurea-fill the slab back to sound, level concrete that's ready to coat or ready to use.
Made-in-USA melamine storage built for actual garages. Two series, the Vault for floor-to-ceiling pantry storage, the Tradesman for overheads + base + slatwall. Installed by the same crew that does your floor.
Two finish systems over the same polyurea base and polyaspartic top coat: decorative flake blends and paint-matched silica. Every floor gets a slip-resistant top coat, and residential and commercial floors carry the same lifetime warranty.
Decorative vinyl flake broadcast. Durable, slip-resistant, and the most popular choice for garages, shops, and commercial spaces.
Tap any blend to see it larger.
All blends include a slip-resistant polyaspartic top coat.
Get a free quoteDiamond-ground prep, polyurea base, flake or silica broadcast, clear top coat. The slab underneath is the only thing that changes. See the full concrete coatings lineup, or pick your surface below and the system follows.
Residential garage floors over diamond-ground concrete. 1-day install, walk on it in about 8 hours, drive on it in about 72.
UV-stable polyaspartic for exterior slabs. Resists Idaho freeze-thaw, road salt, and deicer. Will not yellow.
Smooth silica sand systems with paint-matched colors for finished basements, mudrooms, kitchens, and showrooms.
High-bay polyaspartic for aircraft hangars, RV bays, and oversize vehicle storage. Resists hot-tire pickup and hydraulic fluid.
Mechanic shops, woodshops, equipment storage. Built for hot tires, fluids, and impact.
Showrooms, retail, restaurants, hospitals and clinics, manufacturing floors. Phased installs to keep operations running.
Slab needs work first? Our concrete repair fixes cracks, joints, spalls, and pitting, as part of the coating project or on its own.
Find your town
Coeur d'Alene, ID Dalton Gardens, ID Post Falls, ID Hayden, ID Spokane, WA Spokane Valley, WA Liberty Lake, WA Sandpoint, ID Boise, ID Meridian, ID Eagle, ID Nampa, ID
Most garages start and finish on the same day, with our own crew from grind to top coat. Here is how the day runs.
25-inch planetary grinders open the slab profile, and we dust-extract as we grind. Your garage stays habitable.
Routed cracks filled with polyurea. Pitted and chipped areas patched with rapid-set mortar before any coating goes down.
First pigmented polyurea coat goes down with squeegee and back-roll. Chip broadcast happens while it's still wet.
Vinyl chip broadcast to refusal. You literally cannot fit another flake.
After the base sets, loose chip is razor-scraped flat and vacuumed. The slab is now level, sharp, and primed for clear.
High-solids polyaspartic clear locks the chip. UV-stable. Chemical-resistant. Walk on it in about 8 hours, drive on it in about 72.
Crew packs up at sunset and the cure clock starts. Walk on it in about 8 hours. Set light things on it in 24. Heavy in 48. Drive on it in about 72. By the weekend you've forgotten the slab was ever bare.
Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Or call 208-500-1043
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.