★★★★★
“We love our floor! I would make this decision 100x over again. A big thank you to Karl and his team for taking great care of us!!”
Joe Angelo
Garage floor coatings in Meridian, ID
Our Boise location coats Meridian garage and concrete floors in a day and brings the whole install to your driveway. Paramount, Bridgetower and south Meridian are core local service, with a free on-site measure and no trip charge.
Rhino Coatings in Meridian at a glance
- Served from
- Our Boise location
- Phone
- 208-228-9779
- Hours
- Mon-Sat 7am-7pm MT
- System
- Polyurea base coat, polyaspartic top coat
- Install
- One day on most floors
- Warranty
- Lifetime, residential and commercial
Cities served
Meridian, Boise, Eagle, Star
Your local office
Rhino Coatings Boise, 208-228-9779, Mon-Sat 7am-7pm MT. Google reviews
Idaho registration
Registered Idaho contractor #7661574. Search Idaho DOPL records
What a garage floor coating in Meridian includes
A new Meridian three-car garage comes with bare concrete. Our Boise-based crew coats it in a day: polyurea base, flake to full refusal, UV-stable polyaspartic on top.
That fresh slab in Paramount or Bridgetower won't stay fresh on its own. Heat, tires, and concrete dust start working on it immediately.
How each layer goes down is on our garage floor coatings page.
Evening hot tires
Every commute home ends with hot tires parked on your slab, and in a Meridian summer that's a daily stress test. Epoxy fails it: the heat softens the film and the tires peel it loose. Our polyaspartic topcoat resists hot-tire pickup and holds its grip on the concrete.
Sun with the door up
With the garage door open for kids, bikes and driveway projects, direct sun lands on the floor, and sunlight yellows epoxy. The polyaspartic topcoat is UV-stable and does not yellow, so the flake blend you picked keeps its color from the driveway edge to the back wall.
Builder-slab dust
A garage slab that never got coated sheds fine gray dust every time you sweep, and it drifts into the house through the mudroom door. Grinding the concrete and sealing it under base coat, flake, and topcoat stops the shedding permanently. Sweep once, done, no haze on everything.
Polyaspartic floor coatings in Meridian
Polyaspartic is a topcoat, and a topcoat is only as good as what is under it. We diamond-grind every slab, fill cracks and control joints with polyurea, roll a polyurea base coat, broadcast your flake blend to full refusal, and seal it all under the UV-stable polyaspartic finish. The stack comes out more abrasion-resistant than epoxy and resistant to hot-tire pickup, oil and deicer.
We install polyaspartic, not epoxy. The comparison, every flake blend, silica color and cure time are on our polyaspartic floor coatings page.
Rhino Coatings at a glance
53 reviews republished from Google and Housecall Pro, BBB Accredited with an A rating, veteran-owned
★★★★★
“Customer service for Rhino Coatings was excellent. Karl paid meticulous attention to detail each step of the way and adhered to the recommended curing rates for every layer without trying to cut any short for convenience. He stayed late on the job in order to finish on schedule and yet performed each step for the highest quality results. Karl and his staff were always polite and considerate of my needs and were great to work with. Communication was wonderful, as I expected. I would highly recommend Rhino Coatings if you want a top quality job.”
Eileen Esplin
Reviews republished from Housecall Pro. Read more customer reviews.
What we coat in Meridian
Floor coating questions in Meridian
Is Rhino Coatings local to Meridian?
Yes, we have a Boise location, so Meridian is local service with no trip charge. The free on-site measure is usually within a few days.
How long does a Meridian garage floor take?
It's a one-day install: diamond-grind, base coat, flake or silica broadcast, topcoat. Walk on it in about 8 hours, drive on it in about 72.
What does a coated floor cost in Meridian?
Every quote is a fixed, written price after a free on-site measure, with no surprise upcharges. Call 208-228-9779 or request a quote online.
We're closing on a new build. When should the floor happen?
Ideally before the garage becomes storage. The slab does need to be fully cured first, which we verify at the free measure. Coating an empty garage is faster for the crew and cleaner for you, so the window between closing and move-in is a good time to do it.
How do we pick a color for a house we haven't moved into yet?
We bring the samples to the slab: 13 flake blends and 1,700+ silica colors, held against your actual concrete in your garage's light. A blend that plays off the exterior stone or trim is a good place to start. You decide standing on the floor, not squinting at a screen.
Is the middle of summer a bad time to install?
No. A summer install is a normal one-day job: walk on it in about 8 hours, park on it in about 72. We confirm the timing for your install day before we start.
What does the lifetime warranty include?
It covers the coating system itself, in writing, for life, on residential and commercial floors alike. It's backed by the crew that installed it: we're in-house, no subcontractors, so there's never any finger-pointing between a salesman and an installer if you ever need us back.
Can you coat more than just the garage?
Yes. Covered patios, basements, laundry and storage rooms all take the same system. Outdoors, the UV-stable topcoat is what keeps the color from yellowing in the sun. For basements we check the slab at the free estimate before we coat. One crew can often handle garage and patio in the same visit.
More answers on our floor coating FAQ.
Get a free floor coating quote
Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Get a free quote
Or call our Boise team at 208-228-9779
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Sat 7am-7pm, Mountain time.
- Free measure
- Fixed price
- Lifetime warranty
- Veteran-owned and insured