Spokane garage floor coatings come from our Coeur d'Alene location, whose crews work the Washington side every working day and coat basements and shop floors there too. A worn South Hill garage and a new basement in Mead get the same one-day install we run at home, and so do Spokane Valley, Liberty Lake, Cheney and Airway Heights, with no minimum job size.
Spokane concrete has a history. A lot of the garages, basements and shop floors in older neighborhoods sit on slabs poured generations ago, pitted, dusty and hairline-cracked from decades of freeze-thaw. That is not a reason to skip a coating; it is the reason to do one properly. We diamond-grind to clean stock, fill cracks and joints with polyurea, and rebuild the wear surface with the polyurea base coat before any flake flies.
The same system goes down on basements, patios, shops and commercial floors across Spokane. Residential and commercial floors carry the same lifetime warranty against peeling, delamination, and hot-tire pickup, in writing with a fixed price before the crew arrives.
Cities served
Spokane, Spokane Valley, Liberty Lake, Cheney, Mead, Airway Heights
Your local office
Rhino Coatings Coeur d'Alene, 208-500-1043, Mon-Fri 8am-6pm, Sat 8am-4pm PT. Google reviews
Washington registration
Registered Washington contractor #RHINOCL741CF. Verify with Washington L&I
We have crews in Spokane every working day and no job minimum, and the coating system is built for old South Hill slabs and road salt winters alike.
Spokane runs older than most of our service area. Older houses mean older concrete, and older concrete has taken decades of Inland Northwest winters on the chin.
How each layer goes down is on our garage floor coatings page.
Road salt, brine and deicer are nasty on bare concrete: they soak in with the meltwater and speed up surface scaling. Every winter commute drips them onto your slab. The polyaspartic topcoat is chemically resistant to road salt, brine and deicer, so the brine never reaches the concrete.
A lot of Spokane garages sit on concrete poured generations ago: pitted, dusty, hairline-cracked. That's not a dealbreaker, it's the reason to coat. We diamond-grind to clean stock, fill cracks and joints with polyurea, and build a new wear surface with the base coat before flake ever flies.
Old slabs have already been through thousands of freeze-thaw cycles, and each new winter finds the weak spots. A rigid coating makes that worse. Our polyurea base stays flexible through the swings, so each winter's movement is bridged instead of cracking the finish.
Every Spokane floor gets diamond grinding, polyurea crack and joint repair, a polyurea base coat, flake or silica to full refusal, and the UV-stable polyaspartic topcoat that makes the whole stack more abrasion-resistant than epoxy.
We install polyaspartic, not epoxy. The comparison, every flake blend, silica color and cure time are on our polyaspartic floor coatings page.
Rhino Coatings at a glance
53 reviews republished from Google and Housecall Pro, BBB Accredited with an A rating, veteran-owned
Rhino Coatings is headquartered in Coeur d'Alene, Idaho, 34 miles east of downtown Spokane. Spokane is a daily route, not a special trip: the crew is already on the Washington side every working day with material on the truck.
“Dustin and his team did a fantastic job on our floor. They started at 8am and didn't finish until 10pm that night. Went above and beyond to ensure the final product exceeded our expectations. One point that specifically stood out, was the clear communication from everyone with Rhino, on the process throughout the day. The entire team clearly has been through extensive customer service training. I wouldn't hesitate to recommend to my family and friends.”
“Karl is customer focused and will attempt to complete the job as to the customer needs. Karl is honest and friendly.”
Reviews republished from Google and Housecall Pro. Read more customer reviews.
Public records and third-party ratings, each linked to the source that issued it.
Nearby service areas
Spokane Valley, WA Liberty Lake, WA Coeur d'Alene, ID Post Falls, ID Hayden, ID
Yes. Rhino Coatings is a registered Washington contractor, #RHINOCL741CF, bonded and insured. Spokane is on our daily Washington route, so scheduling is quick.
No minimum. A single garage bay or a full commercial floor both get the same crew and the same polyurea base and polyaspartic top coat system, with the same lifetime warranty.
Yes. Spokane, Spokane Valley, Liberty Lake, Cheney, Mead and Airway Heights are all on the same daily Washington route out of Coeur d'Alene, with no job minimum in any of them.
That is what the system is built for. The polyaspartic top coat is chemical-resistant, so road salt and deicer tracked in on the tires sit on the surface until you rinse or squeegee them out the door, and the polyurea base stays flexible through freeze-thaw. Cold slabs can lengthen the install day and the cure, so we confirm walk-on and drive-on timing, or move the date, before we start. More on how our garage floor coatings are built.
Yes. Shops, showrooms and other commercial floors in Spokane get the same polyurea base and polyaspartic top coat, installed by our own crew. Commercial floors carry the same lifetime warranty as residential ones.
Walk on it in about 8 hours and drive on it in about 72. Most Spokane garages are a one-day install, so the usual rhythm is coat today, walk tomorrow morning, park in three days.
Yes. Spokane garage cabinets are installed by the same Coeur d'Alene location that coats Spokane floors, which covers North Idaho and the Spokane area: the Garage Vault and Tradesman series in 18 colors, put in by our own crews after a free design visit. Garage cabinets in Spokane.
Almost always. We diamond-grind past the damaged cap, fill cracks and joints with polyurea, and rebuild the wear surface with the polyurea base coat before flake and topcoat go down. Pitted, dusty slabs are what this prep is built for.
No. Road salt and deicer brine are rough on bare concrete because they soak in with the meltwater, but the polyaspartic topcoat is chemically resistant to rock salt, brine and deicer. The brine sits on top until you rinse it out the door. The slab underneath never sees it.
There isn't one: homes, commercial floors, shops, and business spaces all carry a lifetime warranty on the coating system. It comes in writing with your fixed price, and it is backed by the same in-house crew that installed the floor, not a subcontractor you'll never find again.
No. Hot-tire pickup is one of the three failures the lifetime warranty specifically names, alongside peeling and delamination, on residential and commercial floors alike. It happens when a thin coating softens under a warm tire and lets go of poorly prepared concrete. Diamond grinding to clean stock and a polyurea base coat that bonds to it are how we prevent it.
It depends on square footage and how much repair the slab needs, which is why we quote at your floor instead of over the phone. The measure is free, the price is fixed in writing, and there are no surprise charges after. Call 208-500-1043 and we can usually get a rep out fast.
More answers on our floor coating FAQ.
Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Or call 208-500-1043
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.