We grind, repair and coat driveways and patios in Hayden with a system built to shed road salt and deicer and flex through freeze-thaw. Government Way subdivisions and acreage off Hayden Lake alike have concrete that works hard and weathers hard.
Hayden properties run bigger: longer driveways, wraparound patios, walkways that see boots, tires, and snowmelt all winter. The coating has to outlast the traffic.
Acreage driveways carry more than a sedan. The system is more abrasion-resistant than epoxy, resists hot-tire pickup, and does not stain when the tractor drips oil. Heavy equipment turning on the pad is exactly the abuse this coating was formulated to take.
Freeze-thaw is the quiet killer of North Idaho concrete. Moisture works into pores and cracks, freezes, and flakes the surface a little more every year. We cover the wear surface with a flexible polyurea base that moves with the cold instead of fighting it, and the topcoat sheds salt and deicer before they soak in.
South-facing patios near Hayden Lake take direct UV all summer, and that is where epoxy turns yellow and chalky. Polyaspartic is UV-stable by chemistry, not by marketing, so the color you pick is the color it stays. Broadcast texture keeps wet feet planted around hot tubs and steps.
Hayden is about the shortest drive on our schedule, so exterior jobs here get booked fast when a good weather window opens. That matters outdoors: cold slabs can lengthen the install day and the cure, so we confirm walk-on and drive-on timing, or move the date, before we start. Epoxy needs days of cooperative weather; our install is one day for most driveways.
Every exterior job starts the same way: diamond grinding to open the concrete, polyurea in the cracks and joints, then the polyurea base coat, a full-refusal broadcast of flake or silica, and the UV-stable polyaspartic topcoat over everything. You choose from 13 flake blends or 1,700+ silica colors with samples on your own concrete. Fixed written price, in-house crew, lifetime warranty.
Cities served
Hayden, Hayden Lake, Dalton Gardens, Coeur d'Alene
The same process on every slab we touch, whether it is next door or across town.
Exterior slabs usually need work first: polyurea in the cracks and joints, spall repair, then a full diamond grind of the surface.
The polyurea base coat goes down and flake or silica is broadcast to refusal, building in the texture that keeps wet concrete walkable.
The polyaspartic topcoat is built for full sun and freeze-thaw. Walk on it in about 8 hours, drive on it in about 72.
Almost always. Oil stains, surface spalling, and hairline cracks all come off or get repaired during prep. We diamond-grind to clean concrete, fill damage with polyurea, and build the system fresh. The rare slab that is beyond saving gets called out at the free measure, before you spend anything.
No. Snowblower skid shoes and shovel edges are routine wear, and this surface is built for far worse. The one thing we flag honestly is a truck plow with a bare steel blade: the coating resists abrasion, but poly blade edges are the right call if a plow service clears your place.
Walk on it in about 8 hours and drive on it in about 72. Cold slabs can lengthen the install day and the cure, so we confirm walk-on and drive-on timing, or move the date, before we start.
All of it: patios, walkways, porches, pool decks, shop aprons. Exterior concrete gets the same polyurea base and UV-stable polyaspartic topcoat regardless of what it is under your feet. Bundling a driveway with a back patio in the same visit saves on mobilization.
Honest answer: it depends on the square footage and how much repair the slab needs, and we do not invent numbers by phone. The measure is free, happens at your place, and ends with a fixed written price. Call 208-500-1043 and we will set it up around your schedule.
More answers on our floor coating FAQ.
“We hired Rhino Coat to apply the concrete floor coating to our shop and hanger and were very impressed with the results. The crew was very professional and completed the job in the estimated time. Karl was very detail oriented and provided a few extras that were not expected. Highly recommend Karl and his crew. We are extremely satisfied.”
“Great professional product. Quick install. Very reliable! I would recommend these guys and their efficient business!”
Reviews republished from Google. Read more customer reviews.
Nearby
Driveway & Patio Coatings in Coeur d'Alene Driveway & Patio Coatings in Post Falls Driveway & Patio Coatings in Sandpoint Driveway & Patio Coatings in Spokane
Tell us about your driveway or patio and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Or call 208-500-1043
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.