Garage floor coatings inSpokane, Washington.
Our shop sits 34 miles east, and we have crews in Spokane every day. Fully licensed in Washington, no job minimum, and a coating system built for old South Hill slabs and magnesium chloride winters alike.
Older slabs, harder winters.
Spokane runs older than most of our service area. Older houses mean older concrete, and older concrete has taken decades of Inland Northwest winters on the chin.
- 01
Magnesium chloride
Washington treats its roads with magnesium chloride, and it's nasty on bare concrete: it draws moisture in and accelerates surface scaling. Every winter commute drips it onto your slab. The polyaspartic topcoat is chemically resistant to mag chloride, road salt, and deicer, so the brine never reaches the concrete.
- 02
Slabs with history
A lot of Spokane garages sit on concrete poured generations ago: pitted, dusty, hairline-cracked. That's not a dealbreaker, it's the reason to coat. We diamond-grind to clean stock, fill cracks and joints with polyurea, and build a new wear surface with the base coat before flake ever flies.
- 03
Freeze-thaw on tired concrete
Old slabs have already been through thousands of freeze-thaw cycles, and each new winter finds the weak spots. A rigid coating makes that worse. Our polyurea base stays flexible through the swings, bridging minor movement so winter number sixty looks no different than winter number one.
The garage floor system, done right.
Rhino Coatings is veteran-owned, headquartered in Coeur d'Alene, and fully licensed in Washington, with crews working Spokane daily from the South Hill out to Airway Heights and Cheney. No job minimum, no waiting for an out-of-state crew to make a special trip: we're already over here, every working day, with material on the truck.
Whether the slab went in last year in Mead or seventy years ago downtown, the floor gets the same build: diamond grinding, polyurea crack and joint fill, polyurea base coat, flake or silica to full refusal, UV-stable polyaspartic topcoat. One day for most garages, walkable in about 8 hours, drivable in about 72. Homes get a lifetime warranty; commercial floors carry 15 years.
- Hot-tire proof: the coating stays put when warm tires park on it
- Cures fast: walk on it in about 8 hours, park in about 72
- UV-stable: no yellowing from sunlight through an open door
- Freeze-thaw flexible: holds its bond in cold, unheated garages
CITIES SERVED
Spokane · Spokane Valley · Liberty Lake · Cheney · Mead · Airway Heights
One crew, one day, most floors.
The same process on every slab we touch, whether it is next door or across town.
- 01
Clear, grind, repair
We help move what needs moving, diamond-grind the slab to open the pores, and fill cracks, joints, and spalls with flexible polyurea so the system bonds for good.
- 02
Base coat and broadcast
A polyurea base coat goes down wet, and your flake or silica blend is hand-broadcast to full refusal for a dense, slip-resistant floor with real depth.
- 03
Topcoat and hand-back
A UV-stable polyaspartic topcoat locks everything in. Walk on it in about 8 hours, and park on it in about 72 once it reaches full cure.
Garage floor questions in Spokane.
Are you licensed to work on the Washington side?
Yes. Rhino Coatings is fully licensed in Washington, and our crews are in Spokane every day. We're headquartered 34 miles east in Coeur d'Alene, so Spokane isn't stretch territory; it's core coverage with no job minimum. Call 208-500-1043 and we'll get a free measure on the books.
The garage slab under our older house is rough. Can it be saved?
Almost always. We diamond-grind past the damaged cap, fill cracks and joints with polyurea, and rebuild the wear surface with the polyurea base coat before flake and topcoat go down. Pitted, dusty slabs on the South Hill are a big share of our Spokane work; the system was built for them.
Will road deicer eat through the coating?
No. Magnesium chloride is rough on bare concrete because it penetrates and holds moisture in the surface, but the polyaspartic topcoat is chemically resistant to mag chloride, rock salt, and deicer. The brine sits on top until you rinse it out the door. The slab underneath never sees it.
How long before a crew can actually start?
Not long. With crews in Spokane daily and no job minimum, the free on-site measure usually happens within days, and most garages are one-day installs once scheduled. From there you'll walk on the floor in about 8 hours and drive on it in about 72, deicer season or not.
What's the difference between the home warranty and the business warranty?
Residential floors carry a lifetime warranty on the coating system. Commercial floors, shops, and business spaces carry a 15-year warranty. Both come in writing with your fixed price, and both are backed by the same in-house crew that installed the floor, not a subcontractor you'll never find again.
Next steps in Spokane.
NEARBY
Garage Floor Coatings in Spokane Valley · Garage Floor Coatings in Coeur d'Alene · Garage Floor Coatings in Post Falls
Pour a floor
that outlasts
the building.
Tell us the slab. We'll send a quote. Usually same day, always with photos and a fixed price. No high-pressure sales nonsense.
Takes about 45 seconds. We'll text or email you within the hour.