Garage floor coatings inPost Falls and the Prairie.
Post Falls sits between our Coeur d'Alene shop and the Washington line, which makes it about the easiest place we work. New build on the Prairie or an older place off Seltice Way, we grind it, coat it, and hand it back in a day.
Deicer season is brutal on new concrete.
A lot of Post Falls garages are only a few years old. Deicer and freeze-thaw don't care. The pitting starts the first winter you park inside.
- 01
Deicer, every winter
Seltice Way and every commuter route around it get treated all winter, and the brine comes home with you. It wicks into bare concrete and pops the surface into pits and spalls. A polyaspartic topcoat is a chemical barrier: salt, mag chloride, and slush stay on the surface instead of soaking in.
- 02
Freeze-thaw cycles
North Idaho slabs swell and shrink through every freeze-thaw swing along the Spokane River. Coatings that cure rigid crack right along with the concrete. We fill cracks and joints with polyurea, then lay a polyurea base coat that flexes with the slab instead of fighting it.
- 03
Builder-grade concrete dust
New construction concrete sheds fine dust forever: it tracks into the house, settles on tools, coats everything you store. Grinding the cap off and locking the slab under base coat, flake, and topcoat ends the dusting for good. One pass with a shop towel and the floor is actually clean.
The garage floor system, done right.
We're a Coeur d'Alene company, so Post Falls is a ten-minute run down the road: no trip charge, no waiting a month for a crew. We've coated garages in Riverbend, out toward Hauser, and all over the new subdivisions going in on the Prairie. In-house crews, veteran-owned, and a fixed written price before we start.
Most Post Falls garages are one-day installs. We diamond-grind the slab, repair cracks with polyurea, lay the polyurea base, broadcast flake to full refusal, and seal it with a UV-stable polyaspartic topcoat. Pick from 13 flake blends or 1,700+ silica colors, with samples brought to your slab. Lifetime warranty on residential floors, in writing.
- Hot-tire proof: the coating stays put when warm tires park on it
- Cures fast: walk on it in about 8 hours, park in about 72
- UV-stable: no yellowing from sunlight through an open door
- Freeze-thaw flexible: holds its bond in cold, unheated garages
CITIES SERVED
Post Falls · Coeur d'Alene · Rathdrum · Hauser
One crew, one day, most floors.
The same process on every slab we touch, whether it is next door or across town.
- 01
Clear, grind, repair
We help move what needs moving, diamond-grind the slab to open the pores, and fill cracks, joints, and spalls with flexible polyurea so the system bonds for good.
- 02
Base coat and broadcast
A polyurea base coat goes down wet, and your flake or silica blend is hand-broadcast to full refusal for a dense, slip-resistant floor with real depth.
- 03
Topcoat and hand-back
A UV-stable polyaspartic topcoat locks everything in. Walk on it in about 8 hours, and park on it in about 72 once it reaches full cure.
Garage floor questions in Post Falls.
Our house just got built. How soon can the garage floor be coated?
New concrete needs to cure before it's ground and coated; roughly 30 days is the usual benchmark. We confirm the slab is ready at the free measure. Plenty of Prairie homeowners book us right after closing so the floor is finished before the garage fills up with boxes.
I rolled on an epoxy kit years ago and it peeled. What's different here?
Kits fail on prep and chemistry: paint-thin epoxy over acid-etched concrete lets go the first hot summer. We diamond-grind to open the slab, lay a polyurea base coat that mechanically bonds, and top it with polyaspartic that's about 4x harder than epoxy. Different process, different outcome.
How much of my week does the install eat?
One day for most Post Falls garages. The crew grinds, repairs cracks with polyurea, lays base coat, broadcasts flake to full refusal, and seals it with the polyaspartic topcoat before they leave. Walk on it in about 8 hours; park on it in about 72.
Will August heat make my tires peel the coating?
No. Hot-tire pickup is an epoxy problem: heat softens the film and tires pull it up when you back out. Polyaspartic is about 4x harder and more abrasion resistant, and it's formulated to resist hot-tire pickup. Summer heat coming off the Prairie won't lift it.
Do you charge a trip fee to Post Falls?
No. Post Falls is minutes from our Coeur d'Alene shop, whether you're off Seltice Way, in Riverbend, or out by Hauser. The on-site measure is free, the written price is fixed, and there are no surprise charges on top. Call 208-500-1043 to set it up.
Next steps in Post Falls.
NEARBY
Garage Floor Coatings in Coeur d'Alene · Garage Floor Coatings in Hayden · Garage Floor Coatings in Spokane Valley
Pour a floor
that outlasts
the building.
Tell us the slab. We'll send a quote. Usually same day, always with photos and a fixed price. No high-pressure sales nonsense.
Takes about 45 seconds. We'll text or email you within the hour.