Polyaspartic floor coatings inMeridian, Idaho.
Meridian is full of three-car garages young enough that the concrete is still worth protecting. Coat it with polyaspartic now and the slab never gets the chance to stain, pit or dust. One day of work from a crew based right here in the Valley.
The finish new Meridian homes deserve.
Builder concrete comes bare for a reason: it is your decision what goes on it. Polyaspartic is the version of that decision you only make once.
- 01
Three-car garage country
Subdivisions like Paramount and Bridgetower are wall-to-wall with big garages that work as gyms, shops and storage on top of parking. A flake floor with a polyaspartic topcoat handles all of it: weights, bikes, tire heat, spilled fertilizer. And it turns the biggest room in the house into finished space.
- 02
Desert sun, winter snaps
Meridian floors take high desert UV all summer and hard cold snaps in winter. The polyaspartic topcoat never yellows in the sun, and the polyurea base stays flexible when January freeze-thaw moves the slab. That combination is why we install this chemistry instead of epoxy, which handles neither well.
- 03
One day, minimal disruption
Most Meridian garages go from bare to sealed in a single working day: grind in the morning, base and broadcast midday, topcoat by afternoon. Walk on it in about 8 hours. Park on it in about 72. For a busy household in south Meridian, that speed is the whole sell.
The system under the shine.
Polyaspartic is a topcoat, and a topcoat is only as good as what is under it. We diamond-grind every slab, fill cracks and control joints with polyurea, roll a polyurea base coat, broadcast your flake blend to full refusal, and seal it all under the UV-stable polyaspartic finish. The stack comes out about 4x harder than epoxy and resistant to hot-tire pickup, oil and deicer.
Meridian is core territory for our Treasure Valley warehouse, with Eagle and Star right alongside, so scheduling moves quickly. In-house crews, no subcontractors, ever. You pick from a dozen-plus flake blends or our full range of stain-matched silica colors with samples on your own concrete, get a fixed written price at a free measure, and the warranty on a home floor never expires.
- Polyurea base coat for adhesion, polyaspartic topcoat for armor
- Wide install temperature window, built for short coating seasons
- UV-stable and chemical-resistant: salt, oil, and deicer wipe off
- Walk on it in about 8 hours, drive on it in about 72
CITIES SERVED
Meridian · Boise · Eagle · Star
One crew, one day, most floors.
The same process on every slab we touch, whether it is next door or across town.
- 01
Diamond-grind prep
Every install starts with grinding the slab and filling cracks and joints with polyurea. No shortcuts, because adhesion is the whole ballgame.
- 02
Polyurea base, full broadcast
The polyurea base coat goes down, then flake or silica is hand-broadcast to full refusal: 13 flake blends or 1,700+ silica colors.
- 03
Polyaspartic topcoat
The UV-stable polyaspartic topcoat seals the system. Walk on it in about 8 hours, drive on it in about 72, and it will not yellow.
Polyaspartic questions in Meridian.
Is it smart to coat a garage in a brand-new build?
Yes, once the slab has cured it is the ideal candidate: clean concrete, no stains to grind out, no repairs to make. Coating early means the floor never absorbs oil or winter grime at all. Many Paramount and Bridgetower homeowners book us within the first year in the house.
What is the actual difference between polyaspartic and epoxy?
Hardness, flexibility and UV behavior. Polyaspartic measures about 4x harder and more abrasion resistant, flexes with the slab through freeze-thaw, and holds its color under sun that turns epoxy yellow. It also cures in hours instead of days. Epoxy was the standard twenty years ago. This is what replaced it.
How long until I can park in the garage?
About 72 hours for vehicles, about 8 hours for foot traffic, and the install itself is one day for most Meridian garages. Plan on parking in the driveway over a long weekend and pulling back into a finished garage Monday. We put the exact timing in writing before the crew arrives.
How does pricing work?
Every quote starts with a free on-site measure. A rep checks the slab, measures the square footage, shows you flake samples on your own floor, and writes a fixed price that does not move. No estimate ranges, no surprise charges at the end. Call 208-500-1043 to set up a time.
Can you coat more than just the garage?
Yes. Covered patios, basements, laundry and storage rooms all take the same system. Outdoors, the UV-stable topcoat is the difference maker under high desert sun. For basements we take moisture readings at the free measure and coat only when the slab tests in range. One crew can often handle garage and patio in the same visit.
Next steps in Meridian.
NEARBY
Polyaspartic Floor Coatings in Boise · Polyaspartic Floor Coatings in Nampa
Pour a floor
that outlasts
the building.
Tell us the slab. We'll send a quote. Usually same day, always with photos and a fixed price. No high-pressure sales nonsense.
Takes about 45 seconds. We'll text or email you within the hour.